Evarson Alarm And Automation

Model HFP-11
• Most Sophisticated “Detector Intelligence” available today • Multi-Criteria fire detection for the price of a photoelectric detector • FirePrint™ Technology to discriminate between deceptive phenomena and an actual fire • Easily programmed to match specific hazard profiles from the control panel • Polarity Insensitive with SureWire™ Technology • Pre-Alarm reporting based on fire profile selected • Remote sensitivity measurement capability • System logic activation based on any of three inputs from detector (smoke, heat or neural network) • Detectors are self-testing, completing diagnostics every 4 seconds • Field cleanable chamber with replaceable chamber parts available • Multi-color detector status LED • Two-wire operation • Compatible Model DPU field device programmer/tester unit • Supports software based automatic environmental compensation • Optional fully programmable relay base, audible base, and duct housing

Additional Information:

• Production Capacity: 100
• Delivery Time: One week
• Packaging Details: Box

• Up to 2 Detector Heads reporting to One Ground Level Controller
• Range of 26.2 ft to 328 ft (8 m to 100 m)
• Long range prism kit extends range from 160ft (50m) to 330ft (100m)
• Built in Laser assisted prism mounting
• Auto-Alignment 2 to 4 minutes per head
• AutOptimise: Auto-Correction due to building shift
• Built-in electronic UL/ULC/FM obscuration-aceptance fire test
• Contamination compensation
• Separate Trouble and Alarm relays for each of the 2 channels
• Password protected settings
• Low current draw 5 to 8.5mA
• Built-in 1/2”/M-20 conduit knock-outs on the system controller
• Programmable alarm thresholds: 10% – 60% in 1% increments
• Programmable Fault and Alarm delay: 2-30 Seconds

Additional Information:

• Item Code: 8531
• Production Capacity: 10
• Delivery Time: 7 days
• Packaging Details: Box

we “Evarson Alarm & Automation” are engaged in wholesale trading an excellent quality range of Fire Alarm, Suppression and Hydrant System etc.

Additional Information:

• Production Capacity: 100
• Delivery Time: Ex stock
• Packaging Details: Box

Features:

• Up to six intelligent analog loops hosting as many as 1,500
• Signature Series devices per panel
• Optional integrated eight-channel digital audio
• 10 amp power supply with universal 94 to 264 Vac
• input voltage
• Patented Voltage Boost™ technology delivers consistent voltage
• — even at low battery power
• Four built-in 3-amp notification/auxiliary circuits
• Large 24-line by 40-character backlit LCD
• Simplified operation with the SpeedTouch™ rotary control
• 65 amp hour battery charger
• Eight- or 64-node network nodes using copper and/or fiber
• Supports up to 30 R-Series remote annunciators
• Removable terminals on all low voltage wiring
• Space for up to three additional option cards such as extra
• SLC loops, amplifiers, or dialer/modem
• Optional Ethernet interface
• 1,100 event history log

Additional Information:

• Production Capacity: 100
• Delivery Time: One Week
• Packaging Details: Box

• Signaling Line Circuits (SLCs):  1 expandable to 2; Style 4, 6, or 7
• Intelligent Devices: 636 total devices; 159 detectors/159 modules per SLC
• Notification Appliance Circuits (NACs): 4 (built in); 1.5 amps ea.
• Voice Evacuation Available: Yes, with integrated Digital Voice Command
• Power: 6 amps total system power
• Annunciators: 32 LCD type, 32 ACS type

Additional Information:

• Delivery Time: 2 to 3 weeks
• Packaging Details: Box

3 in 1 loop panel.

• Up to 400mA current dynamically shared across 3 loop circuits.
• Up to 128 Addresses / 32 Zones.
• Easy to programme.
• Out-of-the-box, fully programmable via keypad.
• Auto Addressing.
• Auto Mapping with Intelli-Zone feature.
• On screen help function.
• USB port dual role Host/Device to upload/download language file, firmware, configuration, vocal messages, etc.
• Walk test function.
• Loop break location.
• 4000 Event Log.
• On board PSTN communicator.
• Optional IP board.
• Up to 4 repeaters.
• Fast and simple system configuration via software, also offline.
• Battery/wiring calculation and customizable cables database.
• Remote real time visualization of control panel loop & zone status, etc via IP.
• Easy Remote user interface with control buttons (reset, silence, evacuate).
• Multilevel map based on a tree structure.
• Capability to print zone label sheet for front panel customization.

Additional Information:

• Delivery Time: One week
• Packaging Details: Box

Product Overview:
The FS24X is the latest generation high technology Multi-Spectrum Triple IR (IR/IR/IR/Visible) Flame Detector, which is part of our FSX family of advanced technology Electro-Optical fire detectors. Using our patented* WideBand IR™, WideBand 4.3 micron IR™, and Visible detection technology, the FS24X is a quantum leap in flame detection. Sophisticated software algorithms and dual microprocessors ensure that the FS24X has the highest fire detection performance combined with optimal false alarm rejection.
The WideBand IR™ Infrared technology using high-speed solid-state Quantum sensors allows detection of all types of fires, hydrocarbon and non-hydrocarbon, in all weather conditions. If the detector’s signal is blocked by ordinary window glass, the patented WideBand IR sensors will still alarm to the fire but at a reduced sensitivity and slower response time.
Dual microprocessors provide a high level of fail-safe operation combined with fast and reliable performance. The Master Microprocessor performs high-speed digital sampling and signal-processing calculations: while the slave microprocessor handles various sensor data, performs communications, self-diagnostics and provides interface versatility: and additional memory for storing Event Log and FirePic™ data.
The FSX family of detectors feature our patented* FirePic data storage and information retrieval facility. FirePic™ records pre-fire data, which can be recovered from the Detector’s non-volatile flash memory for post fire analysis and postulation of the fire cause. Additionally, unique Real-Time Graphing (RTG™) allows viewing of the data that the Detector actually sees. A combination of outputs makes the FS24X a truly versatile detector for today’s demanding industrial requirements.
The FS24X Flame Detector has a detection range greater than 200 feet (Very High Sensitivity setting) for the detection of a one square-foot Heptane reference fire and has a cone of vision far greater in volumetric coverage than any other Multi-Spectrum IR Detector. This means fewer detectors can be used as compared to other manufacturers’ detectors.
Additional Features and Benefits:
Features:

• Patented* WideBand IR™ Technology
• Patented* Electronic Frequency Analysis™
• Visible Sensor for optimum false alarm rejection
• Selectable detection sensitivities
• Field-of-View: 110° full 100% cone-of-vision (90° full 100% cone-of-vision model also available)
• Dual microprocessors for reliable performance
• Real-time clock for accurate time dating of events
• FirePic™ — pre-fire event data storage
• Event log with date and time stamp
• RS-485 ModBus communication
• Non-Isolated 4-20 mA Analog output (sink or source)
• Alarm, Fault and Fire Verification relays
• Automatic optical path and electronic self-test
• Widest operating temperature range
• Patented* Electronics Module for components protection with easy plug-in terminations and field installation
• Two ¾” NPT OR 25mm conduit entries
• Low power consumption
• High RFI and EMI immunity
• FM, ATEX, CE mark approvals
• Meets SIL 2 requirements

With our years of experience & in-depth knowledge in this field, we are engaged in offering a quality-assured array of Fire Alarm Control System.

The power supply with separate metal cabinet and all other master control and indicating boards housed in a metal cabinet, provide a complete fire control system for most applications. The panel has maximum capability for four loop cards, which are plugged into the main circuit board. Higher loop requirements can be catered to using the networking feature of the panel.

Feature 

• Touch key pad for user friendly operation.Device 
• Detector wise Configuration facility
• Auto Learning Facility
• Programmable detector sensitivity
• 2000 Event storage with Real Time

Get best price for Sheet metal M S Body Ravel Fire Alarm Systems Dealers, For Office, 24 V Dc

Features: Hassle-free performance Easy to install Requires minimum maintenance Longer functional life Best in functionality Portable Best in class

Additional Information:

• Production Capacity: 10
• Delivery Time: One week
• Packaging Details: Box

The panels combine sophisticated functionality with simple operation and an aesthetically pleasing design. The versatile touchscreen user interface has powerful programming options that allow configurable control over whether messages are transmitted locally or across a network.

Additional Information:

• Production Capacity: 10
• Delivery Time: 3 to 4 weeks
• Packaging Details: box

Addressable Fire Alarm System
1 Loop Fire Alarm System

we “Evarson Alarm & Automation” are engaged in wholesale trading an excellent quality range of Fire Alarm, Suppression and Hydrant System etc.

Additional Information:

• Production Capacity: 10
• Delivery Time: one week
• Packaging Details: box

Feature

- GST200N Series Panel contains 1 loop version GST200N-1, 2 loops version GST 200N-2 and severail other language variant models. 1 loop model can be extended to 2 loops by using an additional loop card (LC200).
- Maximum loop capacity 477 intelligent devices  1 loop model loop capacity is 235 intelligent devices 
- Wide range power supply
- Multiple language options
- 30 logical configurable zones
- PAS and Acknowledge Function
- Dirty Detector Reporting
- Walk Test Function
- Graphical LCD Display
- Zone indication and manual intervention panel
- Approved by LPCB

Additional Information:

• Delivery Time: Ex stock
• Packaging Details: Box

Simens Addressable Fire Alarm System
One Loop, Two Loop and Four Loop System

Fire•Lite’s MS-9600LS(E) and MS-9600UDLS(E) are compact,cost effective, intelligent addressable FACPs (Fire Alarm ControlPanels) with an extensive list of powerful features. Thecombination of Fire•Lite’s newer series devices and legacy300 Series devices, along with the MS-9600LS(E) orMS-9600UDLSE FACP, offer the latest in fire protection technology.LiteSpeed™ is a patented technology that polls 10devices at a time looking for new or different information.When new information is found at a specific address, the systempolls that device several times for any new data. Thisimprovement allows a fully loaded panel with up to 636devices to report an incident and activate the notification circuitsin under 10 seconds. With this new polling scheme,devices can be wired on standard twisted, unshielded wire upto a distance of 10,000 feet per loop. Each Signaling Line Circuit(SLC) loop supports up to 159 addressable detectorsincluding photoelectric, photoelectric with heat, beam, ionization,photoelectric duct, fixed heat, fixed heat with rate-of-rise,and fixed high-heat detectors. It also supports up to 159addressable modules including monitor (two-wire detector,normally open devices), dual-monitor functions (two monitorcircuits from one module, two addresses used), multimonitor(multiple monitor circuits from one module, multiple addressesused), control (for Notification Appliance Circuits), and relay(two Form-C) modules.

Additional Information:

• Delivery Time: With in Week
• Packaging Details: Box

Features:

• Ravel Indian Manufacturer, International standard.
• Switch Mode Power Supply.
• Modular Construction, Serviceable.
• Surface Mount Technology.
• Battery polarity & deep discharge protection.
• As per IS -15908: 2011 Standard.
• 16 X 2 Dot Matrix LCD Display.
• Standby battery backup with built in charging.
• Fire / Fault status in unambiguous colored LED indication.
• Switch Mode Power Supply.
• Tactile Keypad for easy panel operation.
• System on indication.
• Main, Standby status indication.
• Low Battery visual warning with audible tone.
• Relay output for actuators for Fire and Fault.
• Lamp Test facility
• Zone wise one man walk Test Facility.
• Zone wise Isolation facility with loop voltage cut off.
• Compatible to all type of Conventional Detectors.
• Optional Zone Wise Sounder / Zone Wise Contact.

Conventional Smoke Detector
Conventional Heat Detector
we “Evarson Alarm & Automation” are engaged in wholesale trading an excellent quality range of Fire Alarm, Suppression and Hydrant System etc.

Edwards System Technology (EST) fire alarm systems are primarily used as a central control hub for comprehensive fire detection, alarm, and emergency response in a wide range of buildings, from small offices to large, complex facilities like hospitals, airports, and universities

The Addressable Strobe Loop-Powered Visual Indicator (Red) by Apollo Fire Detectors is used to provide a high-intensity visual warning of a fire alarm condition, particularly in environments where audible alarms may be insufficient, such as in noisy industrial areas or for the hearing impaired.

Product Overview:
The FS20X Flame Detector represents a quantum leap in integrating Infrared and Ultraviolet sensing technologies. The FS20X is a Multi-Spectrum and UV/Dual IR/VIS Flame Detector with a proven UV solar-blind sensor. The FS20X exhibits faster false-alarm free response to fires over a wider temperature range and with a much longer detection range compared to conventional UV/IR detectors.
Conventional and older technology UV/IR detectors, using narrow band 4.3 micron IR sensors, will not respond to smoky fires or if the detector lens is contaminated with oil and other substances since both UV and 4.3 micron signals are attenuated, obscured or absorbed by thick smoke or detector lens contaminants. Also, these old technology UV/IR detectors will not alarm to any fire if they are installed behind ordinary window glass.
Dual microprocessors provide a high level of fail-safe operation combined with fast and reliable performance. The Master Microprocessor performs high-speed digital sampling and signal processing calculations: while the slave microprocessor handles various sensor data, performs communications, self-diagnostics and provides interface versatility: and additional memory for storing Event Log and FirePic™ data.
The FS20X Flame Detector has a detection range in excess of 200 feet (very high sensitivity setting) for the detection of a one square-foot Heptane reference fire and has a cone of vision greater in volumetric coverage than most UV/IR detectors. This means fewer detectors can be used as compared to other manufacturers’ detectors.
Additional Features and Benefits:

• Patented* WideBand IR™ Infrared combined with Ultraviolet
• Detection range greater than 200 feet to 1 sq. ft. heptane fire
• Patented* Electronic Frequency Analysis
• Visible Sensor for optimum false alarm rejection
• Selectable detection sensitivities
• Solar blind 90° full 100% cone-of-vision
• Dual Microprocessors for reliable performance
• Real-time clock for accurate time dating of events
• FirePic™ — Up to 6 pre-fire event data storage
• Event log — Up to 200 events with date and time stamp
• Built-in RS-485 ModBus Communication
• Built-in non-isolated 4-20 mA analog output (sink or source)
• Alarm, Fault and Fire Verification relays.
• Automatic Optical Path and Electronic Self-Test
• Widest operating temperature range
• Patented* Electronics Module for components protection with plug-in terminations for easy field installation
• Two ¾” NPT OR 25mm conduit entries
• Low power consumption
• High RFI and EMI immunity
• FM approved

Features• Certified for seismic applications when used with the appropriateseismic mounting kit.• Approved for Marine applications when a marine-listed version isused with marine-listed compatible equipment. See DN-60688.• Complies with UL 2572 Mass Notification Systems (NFS2-3030version 20 or higher).• One to ten isolated intelligent Signaling Line Circuits (SLC) ClassA, B, or X.• Wireless fire protection using SWIFT Smart Wireless IntegratedFire Technology. See DN-60820.• Up to 159 detectors and 159 modules per SLC; 318 devices perloop/3,180 per FACP or network node.– Detectors can be any mix of photo, thermal, or multi-sensor;wireless detectors are available for use with the FWSG(A).– Modules include addressable pull stations, normally open contactdevices, two-wire smoke detectors, notification, or relay;wireless modules are available for use with the FWSG(A).• Large 16 line, 640 character LCD backlit display or use displaylessas a network node.• Network options:– High-speed network for up to 200 nodes (N16e/x, NFS2-3030,NFS2-640, NFS-320(C), NFS-320SYS, NCD, NCA-2, DVC-EM,ONYXWorks, NFS-3030, NFS-640, and NCA).– Standard network for up to 103 nodes (N16e/x, NFS2-3030,NFS2-640, NFS-320(C), NFS-320SYS, NCD, NCA-2, DVC-EM,ONYXWorks, NCS, NFS-3030, NFS-640, NCA, AFP-200, AFP-300/400, AFP-1010, and AM2020). Up to 54 nodes when DVCEMis used in network paging.• Built-in Alarm, Trouble, Security, and Supervisory relays.• VeriFire® Tools online/offline program option.• With built-in Degraded Mode operation, the system is capable ofgeneral alarm if a fire alarm condition is present even if the centralprocessing unit (CPU) fails.• Weekly Occupancy Schedules allow changing sensitivity by timeof day and day of week.• EIA-485 annunciators, including custom graphics.• History file with 4000-event capacity in nonvolatile memory, plusseparate 1000-event alarm-only file.• Advanced history filters allow sorting by event, time, date, oraddress.• Alarm Verification selection per point, with automatic counter.• Autoprogramming and Walk Test reports.• Multiple central station communication options:– Standard UDACT– Internet– Internet/GSM• Positive Alarm Sequence (PAS) Presignal.• Silence Inhibit and Auto Silence timer options.• Optional cloud connectivity for remote off site monitoring throughCLSS (see HON-62034)• Monitor multiple buildings through one off-campus central station,and report through the CLSS Gateway• Optional remote programing through CLSS• Field-programmable on panel or on PC, with VeriFire Tools program,also check, compare.• Non-alarm points for lower priority functions.• Remote ACK/Signal Silence/System Reset/Drill via monitor modules.• Up to 1000 powerful Boolean logic equations.• Supports SCS Series smoke control system in both HVAC andFSCS modes.• FM6320 approved Gas Detection System with FMM-4-20 moduleand any FM listed gas detector.• EIA-232 printer port.• EIA-485 annunciator port.

Additional Information:

• Delivery Time: ex stock
• Packaging Details: box

E2S IS-mC1 IS-Minialert Intrinsically Safe Sounder Beacon

The IS-mC1 is a compact combined 100dB(A) alarm sounder and L.E.D. beacon – only one Zener barrier or galvanic isolator required to run both sounder & beacon or alternatively the unit can be operated as individual signals.

Approvals include ATEX, IECEx and GOST-R for Z one 0 applications and FM approval for Class I Division 1 and Class I Z one 0 applications.

Key Features

• Input overload and reverse current protection
• End of line resistor certified
• Auto synchronised sound output
• Prismatic lens optimises L.E.D effectiveness
• Available with custom tone configurations and frequencies

Approvals

• ATEX certificate: SIRA 05ATEX2084X,

EN 60079-0 : 2012,EN 60079-11 : 2012,

IEC 60079-26 : 2014

• IECEx certificate: IECEx SIR 06.0045X,

IEC 60079-0 : 2011, IEC 60079-11 : 2011,

IEC 60079-26 : 2014

• FM approved:

Class 3600 1998, Class 3610 2010

Class 3810 2005

GOST-R certificate: POCC GB.JB05.B03365